do_page_fault() #2: sending SIGSEGV to btpd for invalid read access from
00000000 (epc == 0041c0f4, ra == 0041c0f4)
current context: b80
dvr_asid: 0x21
########## User stack address: 83d7e000
Page flags: 61000070, index: 524223, count: 0, mapcount: 0
sending signal: 11
Call Trace:
[<8015180c>] force_sig_info+0x54/0x17c
[<80122b48>] do_page_fault+0x3b8/0x450
[<8012290c>] do_page_fault+0x17c/0x450
[<80403fd0>] udp_poll+0x24/0x244
[<8015d0ac>] rcu_process_callbacks+0x314/0x7dc
[<8015d0ac>] rcu_process_callbacks+0x314/0x7dc
[<801f5974>] sys_epoll_wait+0x5f0/0x628
[<801f5958>] sys_epoll_wait+0x5d4/0x628
[<8011bf0c>] do_gettimeofday+0x4c/0x12c
[<801490e8>] tasklet_action+0x104/0x15c
[<80147458>] sys_gettimeofday+0x24/0xb0
[<80123104>] tlb_do_page_fault_0+0x104/0x10c
[<8012038c>] stack_done+0x20/0x40

corepath: /tmp/hdd/volumes/HDD1/core

do_page_fault() #2: sending SIGSEGV to btpd for invalid read access from
00000000 (epc == 0041c0f4, ra == 0041c0f4)
current context: 4b9
dvr_asid: 0x20
########## User stack address: 82b6c000
Page flags: 61000070, index: 523380, count: 0, mapcount: 0
sending signal: 11
Call Trace:
[<8015180c>] force_sig_info+0x54/0x17c
[<80122b48>] do_page_fault+0x3b8/0x450
[<8012290c>] do_page_fault+0x17c/0x450
[<801b00e0>] do_readv_writev+0x1f8/0x298
[<803b4a18>] net_rx_action+0xb0/0x23c
[<801f45ec>] sys_epoll_ctl+0xbc8/0xbfc
[<801f45dc>] sys_epoll_ctl+0xbb8/0xbfc
[<80148be8>] irq_exit+0x18c/0x300
[<80123104>] tlb_do_page_fault_0+0x104/0x10c
[<8012038c>] stack_done+0x20/0x40

I have had dolby digital wired up for years from the days of early 5.1 and found this happens with all dolby outputs i have tested, the sound level does not really drop, it just sounds that way because speakers are in general sending signals to 6 different speakers rather than putting it all out of 2.. you wont notice and shouldnt if the item you are playing is not in Dolby as it will just pump out of two speakers.

I re-test both time and schedule recording with power-off-on cycle test. Still unsuccessful.

Both time reset to factory default and all schedule recorded created before power cycle emptied!!!!!

Not sure what went wrong with this firmware r4824, heard others also having similar issue not seems not consistent

I have a problem that my HDMI doesn't showout 576P instead show 480. Very bad is NO AUDIO. I restart a few times by switchoff the main power, then will be OK for some time. and the problem recurs again.

I dont understand, why the BT is always turn off by itself and every time I ve manually go to setup turn it on even the setup is actually already on and after a while somehow its not active again. This is really readiculous????? How to solve it, because of this my download never finish and will take forever.......

You must log on to DVR with telnet. Then explore directory /usr/local/etc/package/.info/torrents/. Every subdirectory contains one torrent. You must remove the last added torrent and restart BT.

This short description is ONLY for advanced Linux users!

good afternoon

i see that you mention creating folders. being under windows and not being capable of playing with console, i cannot create any folders other than in a GUI windows.
how can i create the resource folder in windows 7, possibly with firefox access...

is it possible? thank you very much

some lines from dmesg output:

---
This is the current time: PowerUP_Done!!!
[I2C0] i2c speed changed to 50 KHz
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
---

Is that normal?

"mount" output:

---
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw,nodiratime)
devpts on /dev/pts type devpts (rw)
none on /sys type sysfs (rw)
none on /tmp type ramfs (rw)
/dev/mtdblock/2 on /usr/local/etc type yaffs (rw,noatime)
/dev/rd/0 on /mnt/rd type vfat (rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
/dev/scsi/host0/bus0/target0/lun0/part1 on /tmp/hdd/volumes/HDD1 type ufsd (rw,nodiratime,nls=utf8,uid=0,gid=0,fmask=0,dmask=0,sparse,force)
/dev/scsi/host0/bus0/target0/lun0/part3 on /tmp/hdd/root type ext3 (rw)
/dev/scsi/host0/bus0/target0/lun0/part4 on /tmp/hdd/livepause type udf (rw)
---

"core" while using "samba".