Note: I don't take any responsibility for damaging POHD by implementing your own working methods, so use at your own risk. Neither this firmware is supported by A.C. Ryan company, so don't ask them in case of problems. If you can't get it working, please inform me in this topic.

Project page: http://playon.unixstorm.org/about.php

Just remember that bftpd has been replaced by vsftpd, btpd by transmission and remote control by InfoSite, so don't turn on anything like FTP, Bittorent or Remote Control in Setup.

There's already info on Installation page, but I'll write one more time: I strongly recommend to install RSS and Optware pack (otherwise you'll not be able to use RSS feeds, Internet Radio and everything from Optware).

Thanks to snappy46 for his knowledge

Are you running youre old transmission on this fixed FW? (if yes, is it possible to get a copy of it?)

I have huge problems with my transmission 2.12. Works great after a clear installation but after a while all the torrents turn red and error message: "tracker did not respond"

So I´m looking for a stable solution, either with youre fixed FW or I´ll try this: http://www.acryan.com/forums/viewtopic.php?f=98&t=10248 from snappy46

No, I'm going to transfer all my /opt packages to the latest firmware shortly.

ipkg is missing on this FW and optware won't install.any ideeas?

Yes, wait till tomorrow. I will upload new version.

tried to doit myself a couple of times but had no luck.

How are you compiling the source code? do you unzip the img then you play with the files inside then you zip it back and shazam?:)
anyway what i don't understand is what's with the nospace thing? can't we just add more ram to the unit?

is it done yet?:)










how about now? is it done? is it ? can i see it? please, can I? can I?

No, not yet. But it will be done today, so don't worry



Sort of.




Open PlayOn!HD and look inside to see where's the problem :]

i would do that if it would fix the problem:)

i'm going to sit here quietly in the dark and wait for you.

Second release: <obsolete link>

CHANGES:
- stripped wpa_supplicant (800 KB saved)
- removed wget => included within new Busybox (288 KB saved)
- removed old Busybox (1.1.3 + 1.11.2) + added Busybox 1.18.0 and limited version of Busybox 1.1.3 to provide full backward compability and new features at the same time (+ 350 KB)
- compressed BMW + PNG images (740 KB saved)
- added missing ipkg-cl (+ 238 KB)
- created /usr/share/empty (needed by vsftpd)

HTTP server may not work properly (will be fixed in next version). More to come soon..