Re: [ HOW TO ] install optware and get transmission, twonky
following are the outputs from my system.
/ # df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 89.4M 71.4M 18.0M 80% /
/dev/mtdblock/2 8.0M 1.3M 6.7M 17% /usr/local/etc
/dev/rd/0 40.0k 40.0k 0 100% /mnt/rd
/dev/scsi/host2/bus0/target0/lun0/part1 931.3G 72.1G 859.2G 8% /tmp/
/ # mount
/dev/root on / type yaffs2 (ro,noatime)
none on /dev type devfs (rw)
none on /proc type proc (rw,nodiratime)
devpts on /dev/pts type devpts (rw)
none on /sys type sysfs (rw)
none on /tmp type ramfs (rw)
/dev/mtdblock/2 on /usr/local/etc type yaffs (rw,noatime)
/dev/rd/0 on /mnt/rd type vfat (rw,nodiratime,fmask=0022,dmask=0022,codepage=cp4
/dev/scsi/host2/bus0/target0/lun0/part1 on /tmp/usbmounts/sda1 type vfat (rw,nod
ls -l /etc/passwd
/ # ls -l /etc/passwd
lrwxrwxrwx 1 root root 23 Jan 1 1970 /etc/passwd -> ../usr/lo
I hope this helps. I really want to run transmission on this system, btpd does not help at all!
I presume you don't have an ext3 partition... Why don't you buy an internal drive... It's the cheapest way to get a NAS....?
Im not too sure about /ext3, how should I find out? My external drive is also relatively free, so I thought I'd buy one when this gets full!!! But is it better to have an internal drive, then maybe I'll get one earlier.
Also, I wanted to check if you know why do I have to keep installing btpd and samba after restarting the system? i just gets uninstalled on its own.
Thanks for all your help frater. Where are you located? It will be good to connect sometime!