Re: AC Ryan miss up my setup - why ?
I have a panasonic GT30 conected with a HDMI cable to my Onkyo Receiver HDMI
I have a BD player connected to the HDMI input on my receiver.
Everything is working fine. I can send audio both ways. And the signal from my BD is OK on TV
But when I connect the AC RyanHD to the HDMI input on my receiver the TV and receiver wont communication any more. I get the signal from the AC ryan to TV.
Any idea ?
It's probably HDMI-CEC that is the issue. The PlayOnHD disables it.
You have to disable a pin on the HDMI cable connected to your PlayOn! unit.
I think it is pin 13 on the HDMI cable. I'm sure someone will correct me if I'm wrong.
The easiest way that I found was to use a thin sliver of insulation tape... Very thin, just to cover pin 13.
Have search and good luck.