|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Loads splash screen but nothing else.
| Author |
Message |
|
Kinesia
Joined: Tue Mar 06, 2012 12:56 am
Posts: 3
|
 Loads splash screen but nothing else. I upgrade my firmware to the latest and it said upgrade successful, but when I turn the playon!hd2 on I just get the the splash screen and it doesn't go to the menus.
I've tried using safe mode to go to older firmwares but they do the same thing, the upgrade/downgrade is successful but I'm stuck on the splash screen.
What can I do?
Thanks
|
| Tue Mar 06, 2012 1:02 am |
|
|
|
Roger
Joined: Thu Mar 27, 2008 6:05 am
Posts: 2214
|
Re: Loads splash screen but nothing else. Do you have any internal disk connected in the player? Can you try to disconnect the drive and try to power again the set if it can show the Menus? If still cannot, i suggest you do another reflash or firmware installation but this time the HDD is not connected. Hope you can try it.
_________________
Best Regards,
AC Ryan Asia Pacific
60 Kaki Bukit Place || 01-12 Eunos Techpark || Singapore 415979
T +65 67483218 ||
Email: asia@acryan.com
Follow Us:
Twitter || Facebook
|
| Tue Mar 06, 2012 7:58 am |
|
|
|
Kinesia
Joined: Tue Mar 06, 2012 12:56 am
Posts: 3
|
Re: Loads splash screen but nothing else. Hi,
No, I don't have a hard drive connected.
Thanks
|
| Tue Mar 06, 2012 10:52 pm |
|
|
|
GregiBoy
Joined: Thu Jan 05, 2012 12:40 am
Posts: 809
Location: Brisbane, AU
|
Re: Loads splash screen but nothing else. And make sure that the USB stick is formatted as FAT32.
_________________
"Beer is living proof that God loves us and wants us to be happy." - Benjamin Franklin 1706-1790
"It's ALWAYS Beer o'clock" - Homer Simpson
|
| Wed Mar 07, 2012 1:15 am |
|
|
|
Kinesia
Joined: Tue Mar 06, 2012 12:56 am
Posts: 3
|
Re: Loads splash screen but nothing else. Yes, USB is FAT32. I did that to get flashing working in the first place.
I can successfully flash the firmware, it just leaves me with a non-working system.
I've reflashed it 3 times now and wait until it says it's finished successfully, but it leaves me with just the PlayOn splashscreen and doesn't go to the menus.
|
| Wed Mar 07, 2012 2:57 am |
|
|
|
wayoflife
Joined: Thu Mar 15, 2012 9:06 pm
Posts: 6
|
Re: Loads splash screen but nothing else. Kinesia wrote: Yes, USB is FAT32. I did that to get flashing working in the first place.
I can successfully flash the firmware, it just leaves me with a non-working system.
I've reflashed it 3 times now and wait until it says it's finished successfully, but it leaves me with just the PlayOn splashscreen and doesn't go to the menus. I am currently experiencing similar symptoms. The ACRHD2 shows only the splash, then goes black and the connection to device is lost. PC shows an error that the USB device is not recognized, TV shows no input available. My unit has not been flashed and still these symptons are there.
|
| Sat Mar 17, 2012 3:24 pm |
|
|
|
wayoflife
Joined: Thu Mar 15, 2012 9:06 pm
Posts: 6
|
Re: Loads splash screen but nothing else. wayoflife wrote: Kinesia wrote: Yes, USB is FAT32. I did that to get flashing working in the first place.
I can successfully flash the firmware, it just leaves me with a non-working system.
I've reflashed it 3 times now and wait until it says it's finished successfully, but it leaves me with just the PlayOn splashscreen and doesn't go to the menus. I am currently experiencing similar symptoms. The ACRHD2 shows only the splash, then goes black and the connection to device is lost. PC shows an error that the USB device is not recognized, TV shows no input available. My unit has not been flashed and still these symptons are there. Flashing the firmware to the latest version solved my issues.
|
| Wed Mar 21, 2012 9:36 pm |
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
