That version is to sort out the filters not being displayed correctly.
As far as I know the YAMJ software has nothing at all to do with the scrolling speed of your firmware, 4824 the scrolling speed is fine - same jukebox done on 7317 the scrolling speed is pretty sluggish to say the least.

Additonally, go into a TV Show that has more than 12 episdoes (say 20), right scrolling to seelct the episode is fine until you get to number 11, then right click once and that is very slow too, so looks like a firmware problem with the skinning in that shuffling along is really slow, scroll to the top number in the example 20, and scroll left all is good until number 10, then trying to go to number 9 slows down again to a crawl.

i cant seem to access the torrent manager page. and i wasn't able to open the ftp site with firefox, only possible with internet explorer.

is torrrent gui being left out?

HELP!!!! ac3 dolby digital audio does not work.
is reproduced in stereo

Hi, it does work. Please check if you have the correct audio setting under audio setup and make sure it is set to passthrough.

I downloaded firefox as I'm not usually using it. Tested and works fine with me, same as IE and Safari. Hope you can check if Samba and BT are enabled under the player network setup. You can also try re-installing the firmware if you wanted too and try again.

thanks roger, now works.
but does not work and DTS HDHR DTS HDMA. can be solved? thanks

I can't MOVE files from USB HDD to internal HDD anymore.

If I select multiple file to copy to HDD it will stop half way and restart to the main screen.

HELP!!!

You can try to check your media player chipset version. Be reminded that only 1073P+ can support HD audio using pass through via HDMI connection to the Amplifier.

So far works this works fine with me, I tested with few MKV and AVI files. At first, I did try to copy multiple files and the result was Ok. Moving those same files also went well.

I suggest you try to re-flash again the firmware, do a checkdisk for both the player and the external drive, try to change USB cable and lastly try to copy atleast one to two files first for you to monitor whether the file is causing this error.

After very limited testing on my PoHD: setting "minFree=4096" seems to provide a reasonable balance of GUI responsiveness, network speed and stability. At 20480 the PoHD was unusably slow, at 2048 I had good speed but also a lockup during testing and at 8192 the GUI was a little slow.

At 4096 I got consistenly over 2MBytes/sec using ftp across a wireless link while watching a movie, using youtube and navigating around the GUI. The GUI was very slow to respond at times but there were no crashes and no network slowdowns. I was running with samba and ftp turned on but dlna and bittorrent off.

Many thanks to Steffen for his work and Evert (Duivels) for the English translation and suggestion.