| Author |
Message |
|
bloemkool
Joined: Sat Jul 24, 2010 8:39 pm
Posts: 61
|
 Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar I suspect the bad samba server on the playonHD. Check the log file generated during the TViXiE2Playon!HD jukebox generation and after failure check whether you are still able to access the internal harddisk from you PC. I noticed that when I try to access the external harddisk attached to the USB of my playon!HDmini from my PC via the network it stalls after the first access burst. I normally attach my external harddisk directly to my PC when I want to update the jukebox, more stable and much faster. I do not know whether that is also possible for the internal harddisk of the Playon!HD?
Good luck.
|
| Tue Sep 06, 2011 9:29 pm |
|
|
|
OMK
Joined: Sun Sep 11, 2011 8:57 pm
Posts: 4
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar bloemkool wrote: I put everything in gui2update0.31.zip (EDIT: updated with lastest version, works with firmware r5540 and r4585) McAffee virus scanner reports that the http.exe contains the so called 'Artemis!A67261273AC7' trojan and puts the file in quarantaine. That doesn't sound good, does it? Another question. The YAMJ jukebox doesn't work with TV series anylonger. Will TViXIE2Playon!HD deal with TV series? I would like to have one entry point for a serie, and then dive into the seasons and select episodes from there. --OMK
|
| Sat Sep 17, 2011 10:17 am |
|
|
|
markw96
Joined: Sat Nov 21, 2009 2:14 pm
Posts: 18
Location: Coventry, England, UK
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar Same problem here lordmpl wrote: Hi, to drag up this post again, I have just aquired my Playon!HD2, always had Popcorns before, but changed to this due to lots of good reviews.
I used to use YamJ on the popcorn so knew what was going on here when i installed this to the AC Ryan, But it is soooo Slloooowwww.
I saw this post after searching through the internet for a different faster jukebox.
I have installed all the components, done the extend, changename and configure parts, all went ok.
I have done all the files and folders with ThumbGen, now where my problem lies is using the Tvixie2Playon!HD file, it opens, i set all the paramerters open the movie folder and it populates fine.
Change the profile to Gui 2.0, back to the biuld menu and click.
After about 5 mins of what seems to be doing nothing I get a window come up stating Access Violation.
any one have any ideas??
I await in anticipation.
Thank You, Mark
_________________
PlayOn!HD: 1073DD, Firmware Version v7.0.6 r2160 >>v7.0.6 r2388 >> V7.3.4 R3582 >> R4824
Internal Hard Drive: Western Digital Caviar Green 2TB
connected via HDMI 1080p 60hz
Samsung LE40M88BDX
|
| Sun Jan 01, 2012 6:50 pm |
|
|
|
bloemkool
Joined: Sat Jul 24, 2010 8:39 pm
Posts: 61
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar markw96 wrote: Same problem here
When you refer to the access violation, you should read my earlier reply: samba issue. Independently of your issue, I advice you to use the new version (0.4) of gui2update. See other post
|
| Mon Jan 02, 2012 7:04 pm |
|
|
|
xvydra
Joined: Sun Apr 10, 2011 2:57 pm
Posts: 17
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar i have one problem.when i created jukebox with 2 movies.in jukebox find in category animated.when i created 266 movies jukebox these 2 movies are not in category animated.Movies are not included in the correct category when there are more.
|
| Tue Jan 24, 2012 9:22 am |
|
|
|
bloemkool
Joined: Sat Jul 24, 2010 8:39 pm
Posts: 61
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar xvydra wrote: i have one problem.when i created jukebox with 2 movies.in jukebox find in category animated.when i created 266 movies jukebox these 2 movies are not in category animated.Movies are not included in the correct category when there are more. I do not understand your problem. Can you elaborate some more and post the log file of TViXiE2Playon!HD. I also advice you to use the latest version of gui2update (currently 0.4).
|
| Tue Jan 24, 2012 6:57 pm |
|
|
|
sjamajee
Joined: Wed Jan 25, 2012 11:20 pm
Posts: 2
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar Hi Bloemkool,
I've succesfully used Thumbgen for creating the moviecovers and used TVXiE2Playon!HD to place everything in order on my pc.
However, I can't find the index.htm file.
All the movies are stored on a internal hd wich is assigned to driveletter Z on my PC (Z:\movie).
After pressing the "Build Menu" button in TVXiE2Playon!HD I can see in the down left corner that the numbers for the different templates are counting up.
When that is done there is a folder named "jukebox" in the Z:\movie folder but there is no index.htm file.
I hope U can help me.
Alvast bedankt.
Groetjes
|
| Wed Jan 25, 2012 11:41 pm |
|
|
|
bloemkool
Joined: Sat Jul 24, 2010 8:39 pm
Posts: 61
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar sjamajee wrote: Hi Bloemkool,
I've succesfully used Thumbgen for creating the moviecovers and used TVXiE2Playon!HD to place everything in order on my pc.
However, I can't find the index.htm file.
All the movies are stored on a internal hd wich is assigned to driveletter Z on my PC (Z:\movie).
After pressing the "Build Menu" button in TVXiE2Playon!HD I can see in the down left corner that the numbers for the different templates are counting up.
When that is done there is a folder named "jukebox" in the Z:\movie folder but there is no index.htm file.
I hope U can help me.
Alvast bedankt.
Groetjes Can you post the output.log file created by TViXiE2Playon!HD and tell which version of gui2update you are using?
|
| Thu Jan 26, 2012 11:17 pm |
|
|
|
sjamajee
Joined: Wed Jan 25, 2012 11:20 pm
Posts: 2
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar I've installed everything from scratch and now it works!
Don't know what I did wrong the first time.
Still have 2 questions:
- I've created the movie info with Thumbgen and the standard template. How do I change the standard template to another template that I've downloaded from the web? In the Options menu, under Moviesheets I've changed the current moviesheets template from standard to the one I wanna use.
After processing files/folders I wanna create the images but nothing happens. Do I have to delete all the exsisting .jpg files from the movie folders or what?
- Is there a manual or can I find a description how I have to create box sets and tv shows?
Thx for your time.
|
| Fri Jan 27, 2012 3:25 pm |
|
|
|
bloemkool
Joined: Sat Jul 24, 2010 8:39 pm
Posts: 61
|
Re: TViXiE2Playon!HD successfully deployed on gui2.0 firmwar sjamajee wrote: I've installed everything from scratch and now it works!
Don't know what I did wrong the first time.
Still have 2 questions:
- I've created the movie info with Thumbgen and the standard template. How do I change the standard template to another template that I've downloaded from the web? In the Options menu, under Moviesheets I've changed the current moviesheets template from standard to the one I wanna use.
After processing files/folders I wanna create the images but nothing happens. Do I have to delete all the exsisting .jpg files from the movie folders or what? When you select process files/folders you probably have enabled the 'without movie info (.nfo file) option. This means that only not yet scraped directories are processed. When you disable this option all selected directories will be processed. sjamajee wrote: - Is there a manual or can I find a description how I have to create box sets and tv shows?
Thx for your time. The _readme.txt file in gui2update describes what steps to perform for normal movies and series. In the Local Communities Dutch forum you can find some threads that provide guides that might help you (in Dutch of coarse).
|
| Sat Jan 28, 2012 3:19 pm |
|
|
