Safe flase it to 4318
Then Flash it to r3583 normal way

Then safe flash to r2115

From there you can safe flash to the newest fw.

Have the same problem, but not only with series. About 10% of my movies show the same behaviour. No cover is shown on the moviepage, and when I press te play button I get the message "No video file found". Reported the problem for the beta version. Official Firmware has the same problem, but under r4824 everything was working fine.

Have you tried the new yamj config tool ?

Is there a newer one than v. 1.03 ?? Use the latest official Yamj release too. Even tried the latest developers release. Same behaviour. As said. Did not have this problem with the latest official firmware release. Did occur however with beta version. Going back to previous official firmware release solved the problem for me without changing anything else.

http://www.acryan.com/downloads/YAMJ_In ... 0_i386.zip (32bit)

http://www.acryan.com/downloads/YAMJ_In ... .0_x64.zip (64bit)

Thnx Kraakie,

I'll try that one.

I had not updated my firmware for a long time.. I had some trouble with upgrading to this version (network issues) bu after down and upgrading it everything works like a charm! The new look is much better!

The reason i upgraded whas I wanted to use the DLNA for my Samsung " allshare" I didn't get it to work yet.. Has anyone got an idea how to get this working?

Hi Kraakie,

Nice. Now the Playon resets every time I start up the Yamj jukebox

Jukebox files display perfectly in Internet Explorer however, so nothing wrong with the generated files.

There seems to be a bug in the fw that when created with the new Yamj installer makes the player reboot

We are testing a internal version that has a fix for this

For the time beeing use the old Yamj installer

Hi Kraakie,

I wanted to make sure that nothing was wrong with my system, so I decided to go to the bottom of it and to test it the long way: start anew from scratch.

First I started with erasing the Jukebox files, and then with reflashing the firmware, as you gave a description of in another thread of this forum (4318 -> 3582 -> 4824). Of course I checked the disk too.

Then I installed Yamj 2.4 and GUI Config 1.03 and build a new Jukebox. No resets at starting Yamj. Then threw away Jukebox files again from my Playon!HD, installed GUI Config 2.0. on my computer and build a new Jukebox. Again no resets.

Then I reflashed to respectively firmware PV73100_v7.4.x.r3966 and firmware PV73100_v7.4.4.r5440 (both European) and followed in both cases the same Jukebox procedure as mentioned above.

Now the configuration of my system (Playon!HD) is a follows:

Software: V7.4.4 r5440
Bootloader: 0000.0202.1026L
Board: 1073DD C+
YAMJ: 2.4
GuiConfig: 2.0

And no resets at starting the Jukebox. So that is solved.

However, still a lot of the moviepages are not working. Displaying no cover image (and sometimes even no text), and at clicking the "play" button the message: "No video file found".
I looked at them all, and discovered that this was the case at all multi-file moviepages and SET's. Single-file movies are all displayed well. I checked and doublechecked the namings of the videofiles and SET's. Nothing wrong with it.

Since the problem with SET's was already reported and acknowledged, I will not research this further. I will wait for a solution. If anyone wants to see how generated files of these cases look like(.html, .jpg, .playlist.jsp, .playlist1.jsp, .playlist2.jsp, .xml, _large.png, _small.png), let me know and I will send an example.

In the meantime I'm glad with this new firmware. It looks and works great. I only hope Yamj will work one day, so I have a movie-guide.

Thnx for your reactions.