Hi
I have a panasonic GT30 conected with a HDMI cable to my Onkyo Receiver HDMI
output .

I have a BD player connected to the HDMI input on my receiver.

Everything is working fine. I can send audio both ways. And the signal from my BD is OK on TV

But when I connect the AC RyanHD to the HDMI input on my receiver the TV and receiver wont communication any more. I get the signal from the AC ryan to TV.

Any idea ?

Yeah.

It's probably HDMI-CEC that is the issue. The PlayOnHD disables it.

You have to disable a pin on the HDMI cable connected to your PlayOn! unit.

I think it is pin 13 on the HDMI cable. I'm sure someone will correct me if I'm wrong.

The easiest way that I found was to use a thin sliver of insulation tape... Very thin, just to cover pin 13.

Have search and good luck.

Cheers.

A.V.

Or you can buy a non-CEC HDMI cable.

Hi
Yes this was the issue. Any one how knows why ACryan haven't sloved this ?

The issue is part of the Realtek hardware and SDK, and not limited to AC Ryan players. The chipset in the V1 players has now been superseded and I suspect the Realtek support for older chipsets and SDKs is not as good as we all would like it to be.
Andy