Hi PlayON!HD Mini2 Owners,

due to several problems regarding the autoscan function which makes the unit go into an infinite reboot loop here is a little how-to fix this problem. The main reason this happens is because some files/folders are damaged on the external USB Storage (HDD) due to unexpected shutdowns for example. Second reason can be that the actual scan database is corrupted for a simliar reason.
You have basically 2 ways of doing this:

I. repair the HDD:
1. connect your external storage device (HDD) to the PC
2. let the Operating System scan the HDD and fix the errors or do a chkdsk /f from the dos command prompt.
3. on the HDD delete the '.THEATER' folder (this will remove the database)
4. in Windows use Safe Removal Tool to remove the HDD
5. disconnect the USB Cable and connect it back to the Mini and power it on

The unit should come back as expected and work normal again. If this fails for some reason and the unit is still rebooting please try II.

II. disable autoscan storage
1. switch on the player without any usb storage connected
2. goto SETUP -> SYSTEM -> Autoscan Storage and disable this option
3. goto SETUP -> SYSTEM -> Clear History Function and switch this on (pre r4585) or just press 'Enter' to clear the cache and history (r4585+)
4. at this point i'd recommend to follow the steps provided in I. as well just to make sure the HDD is properly cleaned / fixed.
5. plug back in the external device (HDD) to the Mini


NOTE: Please be aware that if you have corrupted files/folders on your HDD and you scan them or let them fix they might get deleted. So if you have important files on the HDD backup them first before fixing!

Questions / Suggestions?

best regards,