Custom built YOUR own Conductx cable
with professional looks & performance!! Conductx DIY Kits lets
you custom-fit your own cable without fuss.
This Chain-Your-Drive set lets you custom-fit
the power cables to your drive in a neat and straight chain using
90degree T-Molex / T-SATA Connectx connectors. See the Chain-Your-Drive
in real life action in the picture. Photo sent in by user who has
built his custom Conductx cable for his drives.
You can chain up to 9 drives / drive bay accessories
(6x T-Molex and 3x T-SATA)
We got you started with a semi-built 1.5m long
4-wire cable connected with a Molex Male connector on one end and
open-ended on the other. You add in FlexSleeve, the solder-free
crimp-type T-Molex connectors at the lengths you want (for a custom
fit)... then finish it off with a UVLED light nicely tucked in with
HeatShrinkz. Zero soldering, zero fuss - voila!! your own custom
Conductx cable!!
Here's what you get with the Conductx DIY Kit
: Chain-Your-Drive...
- 1.5m cable with Molex 4pin Male Connector
(the other end open)
- 6x Connectx™ T-Molex Female connector
** (with 5x passthrough cap and 1x endcap)
- 3x Connectx™ T-SATA Female connector
** (with 2x passthrough cap and 1x endcap)
- 2m x FlexSleeve™ 6mm
- 50cm x HeatShrinkz™ 10mm
- 10x Cable Ties
- 6x UVLED
-----
Send us photos of your Conductx DIY cable in action! gallery
@ acryan.com We'd like to see what you have done and post them up here!
-----
AC Ryan Conductx™ is a series of high quality internal power cables that
redefines cable performance with extreme styling. And for those custom cabling
jobs, check out the Conductx™ DIY Kits that lets you can easily custom-fit
your own Conductx™ cables - with the same cool looks, style and professionality
that is Conductx™.
- UV-active fever
UV UV UV... UV-active fever is hot and glowing. Conductx™ glows UV-active
from head to toe!
- UV-active FlexSleeve™ cable sleeving
with UV-active Shrinkz™ heatshrink
Sleeving craze is all hype and the cable styling of choice. You can
see it in the trendy power supplies, psu mods, casemod projects, its everyhwere
- the signature look of a sleeved bunch of cable finsihed with tight heatshrink
tubing at the ends. All Conductx™ cables are pre-sleeved with quality
UV-active FlexSleeve™ as well as color-coordinated
UV-active Shrinkz™.
- UV-active Connectx™
Not only are the FlexSleeves and Shrinkz UV-active, even the connectors are
UV-active. AC Ryan's extensive range of UV-active products make this possible...
the Connectx™ family joins in here to provide a range
of UV-active quality connectors.
- built-in UVLED
Every single Connectx connectors on a Conductx cable is brought to live with
a ultrabrite UVLED shining at it. 3 connectos, 3 UVLEDs... 5 connectors, 5 UVLEDs.
The range of Conductx™ family is extensive - from
your favorite Molex Y-splitters to more extreme Quad Splitters and the new advanced
T-extensons - if there is a cable that you would like us to add to the Conductx™
series - drop us an email : conductx@acryan.com
------
AC Ryan was the first to launch a series UV internal cables
(then featuring UV-tubing) within the UV-active fever family... since then,
the UV-active fever has gone into a hyperfever andnot looking back. With AC
Ryan's higly successful Connectx™ (UV connectors) and FlexSleeve™
(UV sleeving) sparking a psu-modding and sleeving craze, the time is right for
AC Ryan to update its UV internal cables with a new look - the Conductx™
is born.
Note: FlexSleeve™,
Connectx™, and Shrinkz™ are
also available seperately. Click on them to go to their respective pages.
TIP : AC Ryan's extensive productline enables you to make
your own Conductx™ cable with UVwire™
(wiring), Connectx™ (connectors
& pins), FlexSleeve™
(cable sleeving), and Shrinkz™ (heatshrink tubing).
AC Ryan says: "Better designed cables is
the foundation to professional cable management."